基本解释：配合挤压剂
汉语字典(www.zxzidian.com)行业英语频道为您提供配合挤压剂的英文是compounding extruder，compounding extruder的意思，compounding extruder是什么意思等内容，如果您正在查询compounding extruder缩写的全称、翻译、解释等信息，本页内容可供您参考
The physical simulation of combined extrusion about the products with deeper and thinner hole;深微孔复合挤压成形工艺的物理模拟
The numeric simulation and study of experiments in combined extrusion forming of vehicle hub axles;汽车轮毂轴管复合挤压成形数值模拟与试验研究
On the basis of analyses of combined extrusion, the upper bound model of continuous velocity fields is defined, the effect of die geometric parameters on neutral point radius is analyzed, and the radius formula is given, the volume distribution of right and opposed outlets is forecasted and verified by experiments.通过对复合挤压变形特点的分析,建立了连续速度场上限模式,分析了模具几何参数对分流点半径的影响,给出了分流点半径公式,并据此预测了正反出口体积分配比,得到了实验的验证。
Numerical simulation of composite extrusion for internal spline housing;内花键套复合挤压的数值模拟仿真分析
Through research and manufacture of the cone workpiece, the paper tells a processing that comprises the following methods: compound extrusion , thinned the wall with stretchand processing.通过对锥形件产品的研制 ,论证了采用复合挤压、变薄拉伸和扩锥挤压相结合的工艺方法是加工深孔薄壁锥形件的可靠工艺方法 ,得出了变薄拉伸加工中加工率不应处于临界加工率状态的结论。
When the shrinkage of the rod fracture surface much more than that of the cup part fracture surface, its formation by compound extrusion is not applicable.当杆的断面收缩率比杯形部分断面收缩率大得较多时 ,不适合直接用复合挤压成形。
Based on the lance tip of ф245mm,a new forming method was put forward,the compound extrusion simulation model was established,and the hot extrusion process influenced by multi factors was studied by FEM method.以外径245mm的5孔氧(qiāng)喷头上部工件为研究对象,提出了新的成形方案;建立了该产品复合挤压成形的有限元模型,对多因素影响下复合挤压进行了数值模拟研究。
Composite Extrusion Technics and Mould Design of Alumium Alloy Tie Bar铝合金拉杆复合挤压工艺及模具设计
The Distribution Law of the Materials in the Compound Extruding of Cupplng-Cupping Bar(Ⅱ)杯—杆型复合挤压的材料分配规律(Ⅱ)
Compound Cold Extrusion of 7A04 High Strength Aluminum Alloy7A04铝合金复合冷挤压成形工艺的研究
Use of Side Extrusion in Manufacture of Magnesium-Clad-Steel Bar侧向挤压在镁钢复合棒生产中的运用
Study on the Ultra-fine Grained an AZ61 Mg Alloy Fabricated by Cyclic Extrusion Compression;往复挤压制备超细晶AZ61镁合金的研究
Identification and Control of the Process for Composite Forming by Liquid-Solid Extrusion;复合材料液—固挤压过程辨识与控制
Study on the Compound Strengthening Technique of CrWMn Steel Cold Extruding DieCrWMn钢冷挤压模具的复合强化工艺研究
Properties of Cu/FeS Composites Improved via Hot Extrusion Deformation热挤压变形改善Cu/FeS复合材料的性能
Study on the Microstructures and Mechanical Properties of Reciprocating Extrusion Mg_2Si/Mg-Al Composites;往复挤压Mg_2Si/Mg-Al基复合材料组织与性能的研究
Thermal-Mechanical Coupling Numerical Simulation of Reciprocating Extrusion Processes on AZ31 Mg Alloy;AZ31镁合金往复挤压成形热力耦合模拟研究
Researches on Microstructures and Properties of Extrusion-Shearing Deformation for the Magnesium Alloy镁合金挤压剪切复合变形的组织与性能研究
The microstructure and properties of in-situ TiB_2/6351 Al composites after hot extrusion热挤压原位合成TiB_2/6351Al复合材料的组织性能
Study and Application of Hot Extrusion Process for Boss Quill汽车轮毂轴管复合热挤压工艺的研究与应用
The Microstructure, Property and Strengthening Mechanism of Mg-Al-Si Alloy by Reciprocating Extrusion;往复挤压Mg-Al-Si合金的组织、性能及强化机制
Microstructures and Properties of Reciprocating Extruded ZK60 Alloy;普通凝固ZK60镁合金往复挤压组织与性能研究
The Structure and Property of Mg-Al-Si Alloy with Reciprocation Extrusion and Modification;Mg-Al-Si合金往复挤压及变质处理的组织与性能
Microstructures and Mechanical Properties of SiCp/AZ91 Magnesium Matrix Composites Fabricated by Squeeze Casting;挤压铸造SiCp/AZ91镁基复合材料的显微结构与性能
The Numerical Simulation of the Crack Generation during the Extrusion of SiC_W/6061Al Composites;SiC_W/6061Al复合材料挤压裂纹形成的数值模拟
